Fuel
tank corrosion with untreated unleaded gasoline mixed
with water.
Amount
of iron oxide dissolved into the Untreated
fuel: 980 parts per million. |
|
Fuel
tank corrosion under identical conditions using Fuel
Magic treated fuel.
Amount
of iron oxide dissolved in fuel with_Fuel
Magic: only 1 part per million. |
Water
was intentionally added to both tanks (at 0.5% ppm) to
simulate the effect of water condensation in the fuel. The fuel/water
mixture was then recycled through both tanks for an additional
500 hours. The test was stopped, the tanks were cut open and
the amount of rust corrosion was measured. These test photos
show the extensive rust damage that can occur in a few months
when even a small amount of moisture is introduced into the fuel
system.
Fuel
Magic will restore the power that your classic muscle cars were
designed to have with
a cleaner fuel burn, cleaner combustion chambers, reduced valve
wear, increased fuel lubricity and corrosion protection--even
if you don't drive your vehicles often.
Fuel Magic will help farm vehicles and construction equipment achieve
faster cold starts and lower emissions while on the job--with
better engine and fuel system protection during storage. Bulk
treat your service tankers with Fuel Magic and take care of all
of your equipment at once.
The
corrosion resistance and fuel stabilizing properties of Fuel Magic
make it valuable for boat engines, motorcycle engines, snowmobiles,
motorhomes--any vehicle stored in a moist environment with seasonal
use and long storage times.
Use
Fuel Magic to add to your company's bottom line.
